Great Basin Geothermal LLC
| PROSPECT MAPS |
| GEOLOGICAL INFORMATION |
| TOPO MAPS |
| Hyder Hot Spring | Kyle Hot Springs | Leach Hot Spring | New York Canyon | Sou Hot Spring |
What
is Geothermal |
Photos |
About Us |
Contact us |
What is Geothermal?
Geothermal Energy
Geothermal Energy is heat (thermal) derived from the earth (geo). It is the
thermal energy contained in the rock and fluid (that fills the fractures and
pores within the rock) in the earth's crust.
Calculations show that the earth, originating from a completely molten state,
would have cooled and become completely solid many thousands of years ago without
an energy input in addition to that of the sun. It is believed that the ultimate
source of geothermal energy is radioactive decay occurring deep within the earth
(Burkland, 1973).
In most areas, this heat reaches the surface in a very diffuse state. However,
due to a variety of geological processes, some areas, including substantial
portions of many western states, are underlain by relatively shallow geothermal
resources.
These resources can be classified as low temperature (less than 90°C or
194°F), moderate temperature (90°C - 150°C or 194 - 302°F),
and high temperature (greater than 150°C or 302°F). The uses to which
these resources are applied are also influenced by temperature. The highest
temperature resources are generally used only for electric power generation.
Current U.S. geothermal electric power generation totals approximately 2200
MW or about the same as four large nuclear power plants. Uses for low and moderate
temperature resources can be divided into two categories: direct use and ground-source
heat pumps.
Direct use, as the name implies, involves using the heat in the water directly
(without a heat pump or power plant) for such things as heating of buildings,
industrial processes, greenhouses, aquaculture (growing of fish) and resorts.
Direct use projects generally use resource temperatures between 38°C (100°F)
to 149°C (300°F). Current U.S. installed capacity of direct use systems
totals 470 MW or enough to heat 40,000 average-sized houses.
Ground-source heat pumps use the earth or groundwater as a heat source in winter
and a heat sink in summer. Using resource temperatures of 4°C (40°F)
to 38°C (100°F), the heat pump, a device which moves heat from one place
to another, transfers heat from the soil to the house in winter and from the
house to the soil in summer. Accurate data is not available on the current number
of these systems; however, the rate of installation is thought to be between
10,000 and 40,000 per year.
The current production of geothermal energy from all uses places third among
renewables, following hydroelectricity and biomass, and ahead of solar and wind.
Despite these impressive statistics, the current level of geothermal use pales
in comparison to its potential. The key to wider geothermal use is greater public
awareness and technical support.
Information from the Oregon Institute of Technology.